Technical specifications


Direct, downward light distribution. 1, 2, 3 or 4 light openings.

Post: Hot-dip galvanised steel or powder coated, hot-dip galvanised steel
Top: Powder coated aluminium
Shade: Clear acrylic. UV resistant

Height: 1200 mm
Post: 110 x 110 mm
Weight: 18,8 – 19,4 kg

Luminous efficacy: L95-1: 32,6 Lm/W. L95-2: 35,9 Lm/W @3000K, 80Ra
Lumen: L95-1: >946Lm. L95-2: >1436Lm @3000K, 80Ra

LED type: Philips Fortimo LEDstrip gen5
Operational life: >70.000 hours at Ta 25° C. L80B10
Total consumption: L95-1: Standard 20W (max 29W) L95-2: Standard 28W (max 40W) L95-3: Standard 36W (max 40W) L95-4: Standard 40W (max 40W)
Colour temperature: 3000K, 4000K
Colour rendering: CRI >80 (Std.), CRI>90 (Opt.)
Colour accuracy: 3 steps SDCM

Driver type: Philips Xitanium
Operational life: >100.000 hours
Surge protection: >10 kV
Control: Compatible with Dynadimmer, 1-10V by default. Compatible with DALI as optional extra.

For casting or flange mounting

3 cables max 5 x 10 mm². Connection box and fuse are included

IP56, IK10, Insulation safety class II


Design: Friis & Moltke Design

The ADDO L95 MINI bollard light is a 1 metre high version of the ADDO L95 Post Light. This low, sturdy bollard version has the same dimensions as the pole light, apart from the height. The bollard light looks a little bulkier in the surrounding landscape than the *ADDO L96* bollard light, whose dimensions are smaller.

Like its taller friend, the Post Light, the ADDO L95 MINI with its square steel pole and narrow, vertical light panel, is minimalistic in design. When it is illuminated at night, it projects vertical streaks of light out into the dark, but closer to the ground than the street light. The bollard´s vertical accents, which can be clearly seen no matter whether it is dark or light, are well suited for defining pathways and complimenting architectural lines.

A square bollard with vertical lighting

The ADDO L95 MINI consists of a square steel tube with a narrow, rectangular opening in a longitudinal direction at the top. The light shines out from here through a panel of slanted slats. This gives the ADDO L95 MINI a unique, oblong light surface. The slats mean the light from the bollard is focussed downwards resulting in very little light pollution upwards.

In daylight, you can almost trace the edges of the ADDO L95 MINI with your eyes. It is one of the few lights that can stand alone as a totally pure, square element. The ADDO L95 MINI thus creates a very clean, almost futuristic look along paths, driveways or in car parks.

High bollard providing light on one or all sides

The ADDO L95 MINI can be supplied with light apertures on 1, 2, 3 or 4 sides. This flexibility means the ADDO L95 MINI light can be positioned to provide specific focus in a particular area. In some locations, it may be appropriate to open up the ADDO L95 MINI in all directions. Unilateral or all-round lighting can provide the desired effect along paths or near buildings.

Bollard in steel, aluminium and acrylic

The ADDO L95 MINI is made of hot-dip galvanised steel which can be powder coated in any RAL colour. The panel of slats is in white aluminium which is covered by a clear, acrylic plate. The acrylic plate is shockproof and UV-resistant, making the ADDO L95 MINI a vandal-proof post light that will not become discoloured when exposed to sunlight.

All four lights in the ADDO series designed by Friis & Moltke Design feature their characteristic, minimalistic lines. The dimensions of the light panel and pole of the ADDO L95 Post Light are the same as the MINI bollard, but it is only 3 metres high. In addition, the ADDO is also available as a bollard light in the ADDO L96 version, and as an outdoor wall light in the ADDO L96V version. The bollard and wall lights also match each other in terms of dimensions.

The series has been updated to include energy-saving LED light technology. Lampas will also be happy to convert existing lights with older sources of light to LED.

Related products

DETALJER FOR VEDHÆFTNING  Designer_FriisogMoltke_partnerkreds_

Friis & Moltke Design

Friis & Moltke Design har været med fra begyndelsen af Lampas’ historie. Flere af de produkter, som blev tegnet i 1970’erne, er stadig i produktion i dag.

Read more about the designer here


Se eksempler på, hvordan pullertlamper er brugt til stier, parker, havne og boligområder. Pullerter med lys er gode til at skabe stemning og markere adgang i landskabet.

Find more inspiration here

Henrik Dejbjerg Møller

Like to know more?

Give us a call or drop us a line if you have any questions.
At Lampas, we are the lighting specialists and understand everything that needs to be considered when creating attractive yet functional lighting. We´d love to share our experience with you, if you have any questions or have a challenging project ahead of you.

Henrik Dejbjerg Møller

Sales Manager
+45 3073 5777