ANTO L1010-200 – wall light with comfort optics
DESIGN: VE2
DARK SKY CERTIFICATION
ANTO L1010-200 is Dark Sky Approved by DarkSky International. To live up to the DarkSky certification criteria, the light must 1. have dimming capability to 10% of full rating and 2. be fitted with a 3000K or lower light source.
LIGHT DISTRIBUTION
Direct, rotationally symmetrical and diffuse light distribution.
MATERIALS
Lamp housing: Untreated corten steel, hot-dip galvanised steel or powder coated hot-dip galvanised steel
Shade: Opal white, impact resistant polycarbonate, UV-stabilised
DIMENSIONS
Lamp housing: H:190 x W:206 x D:290 mm
Weight: 4,7 kg
LUMINOUS FLUX
Luminous efficacy: >134,2 Lm/W @3000K, 70Ra
Lumen: >3220Lm @3000K, 70Ra
LIGHT SOURCE
LED type: Round board Ø124 mm
Operational life: >50.000 hours at Ta 25° C. L80B10
Total consumption: Default 12W (max 24W)
Colour temperature: 2700K, 3000K
Colour rendering: CRI>80
Colour accuracy: 3 steps SDCM
DRIVER
Driver type: Philips Xitanium
Operational life: > 100.000 hours
Surge protection: >10 kV
Control: Compatible with Dynadimmer, 1-10V by default. Compatible with DALI as optional extra.
INSTALLATION
Wall mounted
CONNECTION
Access backwards. 2 cables max 5 x 1,5 mm².
CLASSIFICATION
CE, IP56, IK10, Insulation safety class I
Available as 3D in Archicad BIM library
ANTO L1010-200 – wall light with road optics
DESIGN: VE2
DARK SKY CERTIFICATION
ANTO L1010-200 is Dark Sky Approved by DarkSky International. To live up to the DarkSky certification criteria, the light must 1. have dimming capability to 10% of full rating and 2. be fitted with a 3000K or lower light source.
LIGHT DISTRIBUTION
Direct, symmetrical or asymmetrical light distribution. Possibility of projectadapted light distribution via a wide selection of light distribution lenses and reflectors.
MATERIALS
Lamp housing: Untreated corten steel, hot-dip galvanised steel or powder coated hot-dip galvanised steel
Shade: Clear, impact resistant polycarbonate, UV-stabilised
DIMENSIONS
Lamp housing: H:190 x W:206 x D:290 mm
Weight: 4,7 kg
LUMINOUS FLUX
Luminous efficacy: >134,2 Lm/W @3000K, 70Ra
Lumen: >3220Lm @3000K, 70Ra
LIGHT SOURCE
LED type: Philips Fortimo FastFlex
Operational life: >120.000 hours at Ta 25° C. L80B10
Total consumption: Default 15W (max 24W)
Colour temperature: 2200K, 2700K, 3000K, 4000K
Colour rendering: CRI>70
Colour accuracy: 5 steps SDCM
DRIVER
Driver type: Philips Xitanium
Operational life: > 100.000 hours
Surge protection: >10 kV
Control: Compatible with Dynadimmer, 1-10V by default. Compatible with DALI as optional extra.
INSTALLATION
Wall mounted
CONNECTION
Access backwards. 2 cables max 5 x 1,5 mm².
CLASSIFICATION
CE, IP56, IK10, Insulation safety class I
Available as 3D in Archicad BIM library
Design: VE2
ANTO L1010-200 is an elegant wall light offering numerous technical options. Adjust the light to fit the requirements of the particular location, and at the same time get a designer light that creates a welcoming atmosphere, even when off.
ANTO L1010-200 is part of the ANTO range. This wall light features the same pleasing, classic lamp shape as the rest of the range. It is available in all colours and fits into both modern and historical settings.
The light housing has the same dimensions and lighting technology as the two post lights in the ANTO range: ANTO L1014 and ANTO L1016. This large, wall-mounted light is therefore ideal to complement the post lights in locations where it is not possible to install a post, e.g. along the side of buildings. Use this effective wall light to illuminate squares, car parks or other locations requiring strong lighting. ANTO L1010-200 can similarly be used above doors or along the side of commercial buildings, where plenty of light is needed for driving or working.
ANTO L1010-200 can naturally also be used for atmospheric lighting on façades and by entrances.
The classic shape of this outdoor wall light directs the light downwards. The broad, folded rim gives the light a sense of solidity and robustness. All edges are rounded and carefully worked. ANTO L1010-200 attaches to the wall by means of a round wall flange.
The light is made from corten steel or hot-dip galvanised steel. Choose a plain, hot-dip galvanised finish for a vibrant, natural grey-mottled metal surface. Or opt for a powder coating in a choice of colours. We can apply a powder coating, in any RAL colour, at our facility in Kolding, Denmark.
If ANTO L1010-200 is to be combined with ANTO post lights in corten steel, the wall light can also be supplied in corten steel. Beware that corten steel may stain the wall, for example when it rains.
A variety of colour temperatures can be chosen, depending on what suits the project.
ANTO L1010-200 can be supplied with many different types of lighting control.
ANTO L1010-200 is Dark Sky Approved by DarkSky International. This means that the lamp with the right settings can be used to create a dark-friendly lighting, where blue light, light spill and light pollution are reduced for the benefit of biodiversity and stargazers.
The ANTO range has been designed by Danish design studio VE2. The range includes two post lights, two wall lights and one bollard in two variants. View the complete lighting range here.
Here at Lampas we have extensive knowledge and experience when it comes to lighting plans and fulfilling lighting requirements. We are happy to share our knowledge and help ensure the success of your specific project. Contact our lighting consultant today for a chat about the available options.
Design that lasts is what characterises VE2. Durability and, wherever possible, recyclable materials plus a timeless, aesthetic design equal sustainability in VE2´s eyes.
Read more about the designer hereBe inspired by these examples of outdoor wall lights used to indicate entrances, highlight doors and support architectural lines.
Find more inspiration hereGive us a call or drop us a line if you have any questions.
At Lampas, we are the lighting specialists and understand everything that needs to be considered when creating attractive yet functional lighting. We´d love to share our experience with you, if you have any questions or have a challenging project ahead of you.
Henrik Dejbjerg Møller
Sales manager
+45 3073 5777
hd@lampas.dk